INTENDED USE:
For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.
FEATURES:
- Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.
- 7-1/2†of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum.
- A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
- The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
- A hydraulic jack tilts the lift arms to match the angle of the spindle. Safety chain provided to secure tires and wheels to the dolly.
- Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.
DIMENSIONS:
|
Lift Height |
|
Low |
3" |
|
High |
41.25" |
|
Lift Arms |
|
Width |
24.25" |
|
Length |
21" |
|
Tilt Angle |
-2° to +30° |
|
Side to Side Adj. |
|
Left |
3.25" |
|
Right |
4.25" |
|
Overall Dimensions |
|
Length |
45.75" |
|
Width |
43.75" |
|
Height |
62" |